研究業績
1997年度（H9年4月～H10年3月）
機械工学科，生産技術工学講座，前川研究室
- K. Maekawa, I. Ohshima and Y. Nakano, Case Studies of Troubleshooting
in Connection with Uncontrollable Chips, J. Materials Processing and
Technology, Vol.62, No.4, pp.352-357 (1996.9)
- K. Maekawa, H. Ohhata, T. Kitagawa and T.H.C. Childs, Simulation Analysis
of Machinability of Leaded Cr-Mo and Mn-B Structural Steels, J. Materials
Processing and Technology, Vol.62, No.4, pp.363-369 (1996.9)
- K. Maekawa, T. Kitagawa and T.H.C. Childs, Friction Characteristics
at Tool-Chip Interface in Steel Machining, Proc. 23rd Leeds-Lyon Symposium
on Tribology (Elastohydrodynamics -- '96" Fundamentals and Applications
in Lubrication and Traction, Eds. D. Dowson et al., Elsevier), University
of Leeds, Leeds, UK, Sept.10-13, pp.559-567 (1996.9)
- T. Kitagawa, A. Kubo and K. Maekawa, Wear Characteristics of Various
Cutting Tools in Steel Machining, Proc. 23rd Leeds-Lyon Symposium on
Tribology (Elastohydrodynamics -- '96" Fundamentals and Applications
in Lubrication and Traction, Eds. D. Dowson et al., Elsevier), University
of Leeds, Leeds, UK, Sept.10-13, pp.569-578 (1996.9)
- K. Maekawa, Y. Hojo and I. Ohshima, Fundamental Study of Nano-Scale
Machining Using Bubble Raft Model, Proc. 23rd Leeds-Lyon Symposium on
Tribology (Elastohydrodynamics -- '96" Fundamentals and Applications
in Lubrication and Traction, Eds. D. Dowson et al., Elsevier), University
of Leeds, Leeds, UK, Sept.10-13, pp.579-586 (1996.9)
- 前川克廣, 切削工具の最新技術動向 -- 被削材の高度化に対し工具材種の革新で切削加工の限界を超える --，18th JIMTOF 特集号，日刊工業新聞社
(1996.11)
- K. Maekawa, Y. Nakano and T. Kitagawa, Finite Element Analysis of Thermal
Behaviour in Metal Machining (1st Report, Influence of Thermophysical
Properties on Cutting Temperature), JSME International Journal, Series
C, Vol.39, No.4, pp.857-863 (1996.12)
- K. Maekawa, Y. Nakano and T. Kitagawa, Finite Element Analysis of Thermal
Behaviour in Metal Machining (2nd Report, Determination of Energy Balance
and Its Application to Three-Dimensional Analysis), JSME International
Journal, Series C, Vol.39, No.4, pp.864-870 (1996.12)
- T. Kitagawa, A. Kubo and K. Maekawa, Temperature and Tool Wear of Cutting
Tools in High-Speed Machining of Inconel 718 and Ti-6Al-6V-2Sn, Wear,
Vol.202, pp.142-148 (1997.3)
- 前川克廣, 結晶の不完全性がナノ切削機構に及ぼす影響の分子動力学シミュレーション，材料，46巻3号，pp.250-255 (1997.3)
- T. Kitagawa, A. Kubo and K. Maekawa, Design of a Three-Dimensional
Cut-Away Tool for the Turning of High Manganese Steels, Int. J. Jap.
Soc. Prec. Eng., Vol.31, No.1, pp.26-32 (1997.3)
- K. Maekawa, M. Maeda and T. Kitagawa, Simulation Analysis of Three-Dimensional
Continuous Chip Formation Processes (Part 1) -- Finite Element Formulation
and Experimental Verification, Int. J. Jap. Soc. Prec. Eng., Vol.31,
No.1, pp.39-46 (1997.3)
- 志賀浩一，前川克廣：有限要素切削シミュレーションシステムの構築（第10報） -- 三次元シミュレーション解析の予測精度，1997年度精密工学会春季大会学術講演会講演論文集，pp.139-140
(1997.3)
- 前川克廣，大島郁也：ナノ切削機構の基礎研究（第4報） -- 泡模型による二次元切削の可視化，1997年度精密工学会春季大会学術講演会講演論文集，pp.1023-1024
(1997.3)
- 前川克廣：最近のイギリスものつくり事情，クボタ東北地区講演会，いわき市 (1997.5)
- K. Maekawa and H. Ohhata, Simulation Analysis of Three-Dimensional
Continuous Chip Formation Processes (Part 2) -- Influence of Tool Geometry
in Turning High Manganese Steel, Int. J. Jap. Soc. Prec. Eng., Vol.31,
No.2, pp.97-102 (1997.6)
- K. Maekawa and H. Ohhata, Simulation Analysis of Three-Dimensional
Continuous Chip Formation Processes (Part 3) -- Influence of Physical
Properties of Work and Tool Materials, Int. J. Jap. Soc. Prec. Eng.,
Vol.31, No.2, pp.103-108 (1997.6)
- T.H.C. Childs, M.H. Dirikolu, M.D.S. Sammons, K. Maekawa and T. Kitagawa,
Experiments on and Finite Element Modelling of Turning Free-Cutting
Steels at Cutting Speeds up to 250 m/min, Proc. 1st French and German
Conference on High Speed Machining, University of Metz, France, June
17-18, pp.325-331 (1997.6)
- K. Maekawa and T.H.C. Childs, Development of Three-Dimensional Virtual
Machining Systems (3D-VMS) for Intelligent Production, Proc. 8th ICPE
(Rapid Product Development, Eds. N. Ikawa, T. Kishinami and F. Kimura,
Chapman \& Hall), Hokkaido University, Sapporo, Japan, Aug.18-20,
pp.169-178 (1997.8)
- 前川克廣（分担執筆）,
機械工学事典，日本機械学会編，日本機械学会（1997.8）
- 大島郁也，大原 浩，川口邦雄，前川克廣, 積層プリント配線板の小径穴加工，1996年度精密工学会秋季大会学術講演会講演論文集，pp.649-650
(1996.9)
- 大島郁也，橋本 厚，前川克廣, 積層プリント配線板小径穴加工時の切削温度と工具寿命，1997年度精密工学会春季大会学術講演会講演論文集，pp.167-168
(1997.3)
